User Manual

C HAPTER 1:INTRODUCTION
7
[F2] The [F2] key is used as a function key (such as accessing a
menu or starting a process). 560 and 660 Series only. Not
available on Model 460 or Model 465.
[F3e] The [F3e] key is used as a left arrow key for scrolling or
as a function key (such as accessing a menu or starting a
process). Not available on Model 460 or Model 465.
[F4d] The [F4d] key is used as a down arrow key for scrolling or
as a function key(such as accessing a menu or starting a
process) . Not available on 460 or 560 Series.
[F5f] The [F5f] key is used as a down arrow key for scrolling or
as a function key (such as accessing a menu or starting a
process) . Not available on 460 Series or 560 Series.
TARGET
Only available on the Model 465. Used as a function key
and a down arrow key.
START The [START] key is used as a function key. 560 and 660
Series only. Not available on 460 Series.
STOP The [STOP] key is used as a function key. 560 and 660
Series only. Not available on 460 Series.
SETUP The [SETUP] key is used as a function key. 660 Series
only. Not available on 460 Series or 560 Series.
0 - 9 & .
Press the numeric keys to enter numeric values 0 through 9.
Press [.] to establish a decimal point or perform an
accumulation in the weigh or count mode. Not available on
Model 460.
CLR
Press this key to clear a numeric entry mistake prior to
entering it into memory. Also doubles as a [NO] key for
answering questions.
SCALE
SELECT
Pressing [SCALE SELECT] will toggle through all the
enabled scale inputs. Not available on Model 460.