User Manual

15
2CHAPTER 2: INSTALLATION
This chapter outlines the basic installation of the 60 Series instruments.
Please take the time to review these important guidelines.

IMPORTANT!
The 60 Series indicators do not include an on/off switch, and therefore
must be installed near a power outlet socket that is easily accessible and in
keeping with UL/CSA safety standards.
TABLE-TOP USE
All models excluding the model 663 have been designed with a swivel
bracket, which lets you tilt the instrument face to any desired angle. When
the instrument is placed on a table, the non-slip rubber feet prevent
scratching and slipping across the surface when keys are pressed.
PANEL MOUNT USE
All models excluding the Model 663 are available in panel mount versions.
When properly installed, the units are suitable for washdown environments.
The panel mount version functions identically to the table top version. The
only difference between the two package types is the mechanical aspects of
the enclosure and the positioning of the main board and display. Refer to the
60 Series Technical Reference Manual for further panel mount version
installation procedures and available options.
PERMANENT MOUNTING
Refer to pages 21 - 24 for panel mount cutout and mounting hole
dimensions.
ENVIRONMENT SUITABILITY
60 Series instruments are supplied in a NEMA 4X (IP66) enclosure and may
be used in a washdown environment. Care must be taken to ensure that the
AC power socket outlet is properly protected.
The keypad is made of silicon rubber. It may be cleaned periodically with a
soft damp non-abrasive cloth. The display window is made from a