User Manual

60 SERIES I NDICATORS
44
displayed. Press [ENTER] if the date is correct and move to the Time
setting mode.
The new time is entered by keying in "HH.MM.SS" in a 24-hour format.
Hours and minutes entries must be separated by a decimal point. Seconds
entry is optional, and if omitted, they are set to zero. To specify seconds, it
also must be separated from minutes by a decimal point. Leading zeroes
need not be entered. For example, if you enter "8.9.45" and press
[ENTER], the time will be set to 08:09:45; if you enter "15.02" and press
[ENTER] the time is set to 15:02:00. If time is entered improperly, the
prompt try h.m.s is displayed. The word Time will then be displayed. Press
[ENTER] if the time is correct.
ENTERING A NEW TIME AND DATE (MODEL
460)
From the weigh mode, [SELECT] until the time/date is displayed. Press
[ENTER] to invoke the date prompt. The [ENTER] key may be pressed to
bypass the date entry. A new date is entered by keying in "MM.DD.YY" (or
"DD.MM.YY" if international format was selected) followed by the
[ENTER] key. Month, day and year entries must be separated by decimal
points. Leading zeroes need not be entered. Using the combination of the
[PRINT] and [UNITS] keys, enter the in the date. If the date is entered
improperly, the prompt try m.d.y (or try d.m.y for international format) is
displayed. The word Date will then be displayed. Press [ENTER] if the
date is correct and [ENTER] again to move to the Time setting mode.
The [ENTER] key may be pressed to bypass the time entry. The new time is
entered by keying in "HH.MM.SS" in a 24-hour format. Hours and minutes
entries must be separated by a decimal point. Seconds entry is optional, and
if omitted, they are set to zero. To specify seconds, it also must be separated
from minutes by a decimal point. Leading zeroes need not be entered. Use
the [PRINT] and [UNITS] keys to enter time. If time is entered improperly,
the prompt try h.m.s is displayed. The word Time will then be displayed.
Press [ENTER] if the time is correct.