MSDS

1. PRODUCT IDENTIFICATION
TRADE NAME (AS LABELED): HOMAX POPCORN CEILING PATCH
PRODUCT CODES: #5220, #5225, #5925, #5225-06
PRODUCT USE: Repair Product
SUPPLIER/MANUFACTURER'S NAME: HOMAX PRODUCTS, INC.
ADDRESS: 200 Westerly Road
Bellingham, WA 98226
CHEMTREC EMERGENCY NO.: 1-800-424-9300 (United States)
1-703-527-3887 (International Collect)
BUSINESS PHONE: [phone]
DATE OF PREPARATION: February 27, 2010
This product is sold to consumers for household use in containers of relatively small volume (i.e. 5 gallon or less in size).
This MSDS has been developed to address safety concerns affecting those individuals working in warehouses and
other places where large numbers of these containers are stored, as well as those affecting potential users of this
product in industrial /occupational settings. All pertinent health, safety and environmental information have been
presented in this document, per the requirements of theUS Federal OSHA Hazard Communication Standard (29 CFR
1910.1200) and Canadian WHMIS.
2. COMPOSITION and INFORMATION ON INGREDIENTS
CHEMICAL NAME CAS # % w/w EXPOSURE LIMITS IN AIR
ACGIH-TLV OSHA-PEL NIOSH-REL
TWA STEL TWA STEL TWA STEL IDLH
mg/m
3
mg/m
3
mg/m
3
mg/m
3
mg/m
3
mg/m
3
mg/m
3
Calcium carbonate 1317-65-3 30 - 60 10 NE 15 * 5 ** NE 10 * 5 ** NE NE
Kaolin 1322-58-7 10 - 30 NE NE NE NE NE NE NE
Silica, crystalline 14808-60-3 1 - 5 0.05 ** NE 10 mg/m
3
% SiO
2
+2 0.05 ** NE 50
Attapulgite 12174-11-7 1 - 5 NE NE NE NE NE NE NE
Polystyrene 9003-53-6 1 - 5 NE NE NE NE NE NE NE
Starch 9005-25-8 1 - 5 10 NE 15 * 5 ** NE 10 * 5 ** NE NE
Water and ingredients present in
concentrations of less than 1% (or
less than 0.1% if carcinogens)
Balance
The ingredients in the balance of this product do not contribute
significant hazards beyond those described in this document. All
pertinent health, safety and environmental information have been
presented, per the requirements of the US Federal OSHA Hazard
Communication Standard (29 CFR 1910.1200) and Canadian WHMIS.
NE = Not Established. * = total dust; ** = respirable dust. See Section 16 for Definitions of Terms Used.
NOTE (1): ALL WHMIS required information is included in appropriate sections based on the ANSI Z400.1-1998 format.
This product has been classified in accordance with the hazard criteria of the CPR and the MSDS contains all the
information required by the CPR.
3. HAZARD IDENTIFICATION
EMERGENCY OVERVIEW:
PHYISCAL DESCRIPTION: This product is a white slurry of odorless sand-like material.
HEALTH HAZARD: This product can cause irritation to the eyes or skin. This product is harmful if swallowed or inhaled.
If vapors, mists or particulates of this product are inhaled, irritation of the nose or throat could occur. Dusts from this
product can contain small amounts of crystalline Silica, a recognized carcinogen.
FIRE HAZARD: This product is non-combustible.
REACTIVITY HAZARD: This product is stable under ordinary conditions of use and storage.
ENVIRONMENTAL HAZARD: This product does not normally present a significant hazard to aquatic or terrestrial life in
Page 1 of 6