User Manual

Radio Frequency Homcloud Remote Control
1. Introduction
The Homcloud radio frequency remote control allows you to activate / deactivate the Homcloud alarm control unit.
Alternatively, the smartphone also works as a remote control when, for example, you are away from home.
2. Specifications
1. Emitting frequency: 433MHz
2. Emitting distance: 30-50 m
3. Programme code: 1527
4. Case material: ABS plastic
5. Battery type: 12V27A battery
6.Product dimensions: 5.4*3*1.5 cm
Homcloud code: WL-RFRC
Model n°: WL-9W
3. Description
• Padlock closed icon: Activates the alarm (ARM)
• Padlock open icon: Deactivates the alarm (DISARM) or stops the siren activated by some
detector / sensor
• Lightning bolt icon: Stay active / active (STAY ARM) only zones selected in the Control Unit / App
settings. It is normally used when, for example, you are at home and you want to activate only
the external or perimeter sensors and not internally.
• Bell Icon: SOS (sends a request for immediate help, starting the siren and calls / messages if
preset to the emergency contacts saved in the alarm control unit
4. Configurations
1. (recommended) For the complete configuration of the remote control read the manual of the
Homcloud Alarm Controller.
Check if battery of remote control is charged. (press a botton and see indicator led on)
Enter the App in the Homcloud Alarm Control Unit already configured and select the "Add Remote
controls" section, then subsequently press any botton of the remote control.