Instructions / Assembly
PARTS
1. STAND (QTY 1)
2. METAL SNAP LOCK POLES (QTY 4)
3. HEAD, BODY, AND ARM (QTY 1)
4. WAIST BRACKET AND MODULE (QTY 1)
5. RIB CAGE AND FABRIC (QTY 1)
Requires 6V 2A ADAPTER ( not included)
or 4AA batteries (not included)
ALL NEW MATERIALS:
METAL, FOAM, PLASTIC, POLYESTER
Surface washable only.
INFERNO SCARECROW™ is a trademark of Tekky.
Copyright © 2021 Tekky.
All Rights Reserved.
MADE IN CHINA
visit us at tekkydesign.com
WARNING
DO NOT TURN ITEM ON UNTIL YOU HAVE COMPLETELY FINISHED ASSEMBLY.
STAY CLEAR OF ITEM WHILE OPERATING. DO NOT PLACE ITEM ON UNEVEN GROUND.
DO NOT PLACE WEIGHT ON ITEM WHILE IN OPERATION.
RECOMMENDED FOR SHELTERED OUTDOOR USE.
DO NOT RETURN THIS ITEM TO THE STORE!
If experiencing technical diculties, or any
parts missing, please go to tekkydesign.com for
assistance or call 1-877-527-0313
BATTERY INSTRUCTIONS AND CAUTIONS
Battery installation and removal should be performed by an adult.
Remove batteries when not in use.
Use only batteries recommended in the instructions.
Do not mix new and used batteries.
Do not mix alkaline, carbon-zinc, nickel-cadmium, rechargeable or
dierent types of batteries.
Be mindful to insert batteries with the correct polarity (+/-) as indicated.
Remove all exhausted batteries.
Rechargeable batteries are only to be charged under adult supervision.
Rechargeable batteries are to be removed from the item before being charged.
Non-rechargeable batteries are not to be recharged.
The supply terminals are not to be short-circuited.
Always dispose of exhausted batteries properly.
Do NOT dispose of batteries in fire, they may leak or explode.
INSTALLATION AND OPERATING INSTRUCTIONS
KEEP ALL PLASTIC AND WIRE PARTS AWAY FROM CHILDREN.
WARNING: DO NOT TURN ON THE PROP UNTIL FULLY ASSEMBLED. STAY CLEAR OF THE PROP WHILE OPERATING.
6 foot inferno scarecrow
™
AA
A
A
AA
A
A
AA
A
A
AA
A
A
BB
B
B
C
VOLUME
CONTROL
C
C
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
AAAA
C
C
CC
VOLUME
CONTROL
D
D
CC
VOLUME
CONTROL
D
D
1. 2.
3. 4.
5.
D
E
E
C
VOLUME
CONTROL
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
C
VOLUME
CONTROL
CC
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
C
C
9.
8.
F
H
H
G
G
F
7.
C
VOLUME
CONTROL
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
C
VOLUME
CONTROL
CC
Footpad
Speaker Jack
DC v
ON
OFF
FOOTPAD
C
C
MOTION
SENSOR
1. Insert METAL SNAP LOCK POLES into METAL STAND. (Match A to A)
2. Insert METAL SNAP LOCK POLES into METAL STAND. (Match B to B)
3. Insert WAIST BRACKET AND MODULE into METAL SNAP LOCK POLES. (Match C to C)
4. Lift the clothing on the HEAD BODY AND ARM and insert the pole into the WAIST
BRACKET AND MODULE. (Match D to D)
5. Connect the arm poles located inside his RIGHT sleeve under the shoulder area on the
HEAD, BODY AND ARM. (Match E to E)
6. Attach RIB CAGE AND FABRIC to HEAD BODY AND ARM using the hook and loop fasteners
located underneath the burlap collar.
7. Reach inside the HEAD BODY AND ARM and connect all three wires located inside the
clothing. (Match F to F) (Match G to G) and (Match H to H)
8. Gently unbend and pose his LEFT (non-moving) arm as pictured.
Make sure the motion sensor is clear from fabric and other obstructions.
9. Reach inside the fabric on the HEAD BODY AND ARM. Connect 6V 2A ADAPTER
(not included) or insert 4 AA alkaline batteries (not included) into the battery compartment
located on the MODULE. Turn the switch to the ON position to activate the item. Move in
front of the item or make a loud sound (clap) to activate. Turn item OFF when not in use
.
WARNING: FAST MOTION. STAY CLEAR OF SWIPING ARM WHILE OPERATING!
*
Battery
Diagram
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation..
Home Depot, 2455 Paces Ferry Road, Atlanta, GA 30339 1-877-527-0313
PROBLEM
TROUBLESHOOTING
SOLUTION
Item will not activate/Motion
sensor does not work
Item will not activate/Arm will
not move
Sound is distorted or faint
No Sound.
No aming eect in head.
Still experiencing a problem? Please call 1-877-527-0313 or go to tekkydesign.com for further assistance.
Ensure all wires are connected securely and matched with the correct labels. See Illustration 7.
Ensure motion sensor is located on the front of the chest is not blocked by
fabric or any other obstructions. To test the motion sensor shine a ashlight in the
motion sensor tube. See Illustration 8.
Ensure all wires are connected securely and matched with the correct labels. See Illustration 7.
If using batteries, replace with fresh batteries.
Ensure the volume knob is not turned all the way down.
1. 2. 3.
4. 5.
7.
6.
Model # 59506 Item# 1006 128 459
EXTERNAL SPEAKER IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
1. Plug speaker cord into the jack labeled SPEAKER JACK
located on the MODULE.
2. Use volume knob on external speaker to control volume levels.
OPTIONAL EXTERNAL SPEAKER SET UP
C
VOLUME
CONTROL
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
C
VOLUME
CONTROL
CC
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
C
C
OPTIONAL FOOTPAD SET UP
1. Insert the cable from optional footpad into the jack labeled
FOOTPAD on the MODULE.
2. Place the switch in the FOOTPAD position to enable
FOOTPAD activation.
3. Step on the FOOTPAD to activate the scary sequence!
Footpads and adapters are sold separately and can be
purchased at www.tekkyaccessories.com
*
FOOTPAD IS NOT INCLUDED. MUST BE PURCHASED SEPARATELY.
C
VOLUME
CONTROL
Footpad
Speaker Jack
DC 6V 2A
ON
OFF
FOOTPAD
BACK VIEW