Instructions / Assembly

ManualsBrandsHome Accents Holiday ManualsArtificial Christmas Trees7.5 ft. Pre-lit Balsam Artificial Christmas Tree with Warm White LED Light

ASSEMBLY:

1) Before you start to assemble your tree, choose a location near a wall outlet.

Assemble the tree stand and place on a level surface.

2) Set up the tree stand by spreading the legs into an “X” shape. Lock the tree stand in

position by threading screws into the 3 holes. Only screw the bolts in until they go

slightly past the inner metal ring. Do not screw the bolts in all the way.

3) Carefully insert the bottom tree section (C) of the tree into the stand. Make sure the

pole is firmly inserted into the stand. Tighten the three screws on the tree stand so

that the tree stands straight.

4) Insert the middle section (B) of the tree into the bottom section (C). Connect the

male light-string end connector in section (B) to the female light-string end connector

in section (C).

5) Insert the tree top section (A) into section (B). Connect the male light-string end

connector in section (A) to the female light-string end connector in section (B).

6) Please note that he two prongs on each male connector have different polarities and

they can only be inserted into the female connector in one orientation. Make sure

the connectors are inserted in the correct orientation, otherwise the lights will not

light up.

7) Plug the transformer in the bottom tree section into the wall outlet. Your tree should

now be lit.

8) Shape the branches by working from the bottom of the tree upwards. Fan out the

tips in a pattern of one to the right, one to the left, and one to the centre of the main

stem. Tips at the centre position should be alternately placed so that they do not line

up one after the other. Repeat pattern for each branch.

9) After shaping the whole tree, step back and take an overall look and shift branches

to fill any gap. Your tree is now ready for decorating.

STORAGE:

1) Unplug the tree from the wall outlet. Disconnect the light strings between each tree section.

2) Remove all decoration from the tree.

3) Carefully lift off the top tree section (A) from the middle tree section (B). Carefully lift off the middle tree

section (B) from the bottom tree section (C).

4) Remove the bottom tree section (C) from the tree stand.

5) Store in original carton.

6) Do not store in direct sunlight, in a damp area, or in an area where the temperature exceeds 40°C.

TROUBLESHOOTING:

1) Ensure the power outlet is working correctly.

Check whether the cord is properly plugged into the outlet.

2) Ensure the light strings on the tree are securely connected. Ensure the light string connectors are connected in the

correct orientation.

3) Check that all bulbs are tightly fitted inside their respective holders.

4) If a bulb is not working, replace the faulty bulb as shown in the figures below. Use the replacement bulbs provided.

To wall

outlet

Instruction Manual

IMPORTANT: Please read this instruction carefully before assembly and save

these instruction for future use.

Sku # 763634

Model: BRHO710008THD

Summary of content (2 pages)

PAGE 1
Instruction Manual Sku # 763634 Model: BRHO710008THD IMPORTANT: Please read this instruction carefully before assembly and save these instruction for future use. ASSEMBLY: A B C 1) Before you start to assemble your tree, choose a location near a wall outlet. Assemble the tree stand and place on a level surface. 2) Set up the tree stand by spreading the legs into an “X” shape. Lock the tree stand in position by threading screws into the 3 holes.
PAGE 2
WARNING - Risk of Fire and Electric Shock: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) Read all instructions and warning tags carefully. For indoor use only. Do not place near gas or electric heaters, radiators, fireplaces, candles or other similar sources of heat. Place on a hard, flat, level surface. Do not place where the tree is likely to tip or wobble due to uneven flooring or thick carpeting. Do not install near fountains, bathtubs, sinks or other wet areas. Do not use candles on the tree.