Instructions / Assembly

IMPORTANT SAFETY INSTRUCTIONS
When using electrical products, basic precautions should always
be followed including the following:
a).
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS.
b). Do not use seasonal products outdoors unless marked
suitable for indoor and outdoor use. When products are
used in outdoor applications, connect the product to a
Ground Fault Circuit Interrupting (GFCI) outlet. If one is
not provided, contact a qualified electrician for proper
installation.
c). This seasonal use product is not intended for permanent
installation or use.
d). Do not mount or place near gas or electric heaters,
fireplaces, candles or other similar sources of heat.
e). Do not secure the wiring of product with staples or nails,
or place on sharp hooks or nails.
f). Do not let lamps rest on the supply cord or on any wire.
g). Unplug the product when leaving the house, when
retiring for the night, or if left unattended.
h). This is an electric product - not a toy! To avoid risk of
fire, burns, personal injury and electric shock it should
not be played with or placed where small children can
reach it.
i). Do not use this product for other than its intended use.
j). Do not hang ornaments or other objects from cord, wire,
or light string.
k). Do not close doors or windows on the product or
extension cords as this may damage the wire insulation.
l). Do not cover the product with cloth, paper or any
material not part of the product when in use.
m).This product has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not use with an extension cord unless
plug can be fully inserted.
Do not alter or replace the plug.
n). This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the
outlet. Also unplug any additional strings or products
that may be attached to the product. Replace the fuse
as per the user servicing instructions (follow product
marking for proper fuse rating) and check the product. If
the replacement fuse blows, a short-circuit may be
present and the product should be discarded.
o). Read and follow all instructions that are on the product
or provided with the product.
p).
SAVE THESE INSTRUCTIONS.
Use and care instructions
a). Before using or reusing, inspect product carefully.
Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the lampholders or
enclosures, loose connections, or exposed copper wire.
b). When storing the product, carefully remove the product
from wherever it is placed, including tree, branches, or
bushes, to avoid any undue strain or stress on the
product conductors, connections, and wires.
c). When not in use, store neatly in a cool, dry location
protected from sunlight.
User servicing instructions
Replace the fuse.
a). Grasp plug and remove from the receptacle or other
outlet device. Do not unplug by pulling on cord.
b). Open fuse holder by unscrewing the cap and remove
the burnt fuse (fig. A).
c). Remove fuse carefully.
d). Risk of fire. Replace fuse only with 8 amp, 250 volt fuse.
e). Insert the fuse into fuse holder and screw back the fuse
holder tightly. (fig. B).
Model NO.PP8880
Each rotating tree stand includes the
following:
1pc extra fuse attached with the product
1pc 1” tree pole adaptor
1pc 1.25” tree pole adaptor
1pc 1.5” tree pole adaptor
1pc 1.75” tree pole adaptor
If extra parts are needed, contact the
Customer Service Team at 1-877-527-0313 between the
hours of 8 am and 5 pm EST, Monday through Friday.
Rotating Tree Stand
Model: GX1623U22F07
Sku no. 1003 173 213
fig.B
fig.A
REPLACE
FUSE
NEW FUSE
1” 1.75”
1.25”
1.5”
PH: 1#