Instructions / Assembly

ManualsBrandsHome Accents Holiday ManualsArtificial Christmas Trees12 ft. Noble Fir Quick-Set Artificial Christmas Tree with 1450 Clear Lights

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical products, basic precautions should always be

followed including the following:

a) READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

b) This product is for indoor use only. The electrical rating 4.93 A 120 V 60

Hz.

c) This seasonal use product is not intended for permanent installation or

use.

d) Do not mount or place near gas or electric heaters, fireplace, candles or

other similar sources of heat.

e) Do not secure the wiring of the product with staples or nails, or place on

sharp hooks or nails.

f) Do not let lamps rest on the supply cord or on any wire.

g) Unplug the product when leaving the house, when retiring for the night,

or if left unattended.

h) This is an electric product – not a toy! To avoid risk of fire, burns

personal injury and electric shock it should not be played with or placed

where small children can reach it.

i) Do not use this product for other than its intended use.

j) Do not hang ornaments or other objects from cord, wire, or light string.

k) Do not close doors or windows on the product or extension cords as this

may damage the wire insulation.

I) Do not cover the product with cloth, paper or any material not part of the

product when in use.

m) This product employs overload protection (fuse). A blown fuse

indicates an overload or short-circuit situation. If the fuse blows, unplug

the product from the outlet. Also unplug any additional strings or products

that may be attached to the product. Replace the fuse as per the User

Servicing Instructions (following product marking for proper fuse rating)

and check the product. If the replacement fuse blows, a short-circuit may

be present and the product should be discarded.

n) This product is equipped with push-in type lamps. Do not twist lamps.

o) This product has a polarized plug (one blade is wider than the other) as

a feature to reduce the risk of electric shock. This plug will fit in a polarized

outlet only one way. If the plug does not fit fully in the outlet, reverse the

plug. If it still does not fit, contact a qualified electrician. Do not use with

an extension cord unless plug can fully inserted. Do not alter or replace

the plug.

p) Read and follow all instructions that are on the product or provided with

the product.

q) SAVE THESE INSTRUCTIONS.

Pre-Assembly

Package Contents

Part

Description

Quantity

Tree top

Upper middle section

Middle section

Lower middle section

Tree bottom

Tree stand

Power supply cord with an

on/off foot pedal switch

12 ft Noble Fir Quick-Set Artificial Christmas tree

SKU# 1001302146

Assembly

Assembling the tree stand

Step 1. Choose a location near a wall outlet.

Step 2. Open the stand to a 90 degree angle until the hole lines up with the

hole on the tube.

Step 3. Screw three eye bolts into the hole.

Assembling the tree

Please remove protective covers from the base of the pole for each tree

section before assembling.

Step 1. Insert tree bottom (E) into the tree stand (F) and tighten the

screws. (See Fig. 1)

Step 2. Insert lower middle section (D) into the tree bottom (E).

Rotate lower middle section (D) slightly to ensure it matches the

tree bottom (E) and there is proper circuit connection if lights are

not functioning. (See Fig. 2)

Step 3. Insert middle section (C) into the lower middle section (D).

Rotate middle section (C) slightly to ensure it matches the lower

middle section (D) and there is proper circuit connection if lights

are not functioning. (See Fig. 3)

Step 4. Insert upper middle section (B) into the middle section (C).

Rotate upper middle section (B) slightly to ensure it matches the

middle section (C) and there is proper circuit connection if lights

are not functioning. (See Fig. 4)

Step 5. Insert the tree top (A) into the tree center (B).

Rotate the tree top (A) slightly to ensure it matches the upper

middle section (B) and there is proper circuit connection if lights

are not functioning. (See Fig. 5)

Summary of content (3 pages)

PAGE 1
2 ft Noble Fir Quick-Set Artificial Christmas tree SKU# 1001302146 Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. a) b) This product is for indoor use only. The electrical rating 4.93 A 120 V 60 Hz. c) This seasonal use product is not intended for permanent installation or use.
PAGE 2
Step 6. Remove the plastic protective cover on the plug fixed on the pole of the bottom section (E). Insert the plug into the end connector of the power supply cord with an on/off foot pedal switch according to the magnified drawing on Fig. 6. Step 7. Allow branches to fall into place or gently pull branches up and out. When adjusting branches be sure that all wires are free of branch hinges. (See Fig. 7) Step 8. Shape the branches.
PAGE 3
Troubleshooting Problem Solution The tree does not light Ensure that all tree sections are plugged into each other and that the tree is plugged into the wall outlet. Check for blown fuses at the extension cord plug and the plug fixed on the bottom section (E). Replace as needed with the replacement fuses provided. Check for loose, broken, or missing bulbs and replace as needed with the replacement bulbs provided.