Instructions / Assembly

ManualsBrandsHome Accents Holiday ManualsArtificial Christmas Trees4 ft. Pre-Lit LED Aspen Fir Potted Artificial Christmas Tree with Warm White Micro Dot Lights

Safety Information

IMPORTANT SAFETY

INSTRUCTIONS

When using electrical products, basic precautions should always be

followed including the following:

a) READ AND FOLLOW ALL

SAFETY INSTRUCTIONS.

b) This product is for indoor use only. The electrical rating 0.5 A 120 V

60 Hz.

c) Do not use seasonal products outdoors unless marked suitable for

indoor and outdoor use. When products are used in outdoor

applications, connect the product to a Ground Fault Circuit Interrupting

(GFCI) outlet. If one is not provided, contact a qualified electrician for

proper installation.

d) This seasonal use product is not intended for permanent installation

or use.

e) Do not mount or place near gas or electric heaters, fireplace, candles

or other similar sources of heat.

f) Do not secure the wiring of the product with staples or nails, or place

on sharp hooks or nails.

g) Do not let lamps rest on the supply cord or on any wire.

h) Unplug the product when leaving the house, when retiring for the

night, or if left unattended.

i) This is an electric product – not a toy! To avoid risk of fire, burns

personal injury and electric shock it should not be played with or placed

where small children can reach it.

j) Do not use this product for other than its intended use.

k) Do not hang ornaments or other objects from cord, wire, or light

string.

l) Do not close doors or windows on the product or extension cords as

this may damage the wire insulation.

m) Do not cover the product with cloth, paper or any material not part of

the product when in use.

n) Read and follow all instructions that are on the product or provided

with the product.

o) SAVE THESE INSTRUCTIONS.

Pre-Assembly

Package Contents

Part

Description

Quantity

Tree section

Tree base

Power cord

4 ft Warm White Micro dot LED Aspen Fir Potted

Tree

SKU# 1003142993

Assembly

CAUTION! – ALWAYS UNPLUG YOUR TREE

FROM ITS POWER SOURCE BEFORE ASSEMBLING OR

DISASSEMBLING.

Assembling the tree

Please remove protective covers from the base of the pole for tree

section before assembling.

Step 1. Insert tree section (A) into the tree base (B) (See Fig. 1)

Step 2. Insert the provided power cord into the connector of tree

section (A) tightly in right direction according to the magnified

drawing on fig. 2.

Step 3. Gently pull branches up and out. (See Fig. 3)

Step 4. Shape the branches. Starting with tips closest to the pole,

shape one tip to the right, one to the left and one at the center

of the main stem. Repeat pattern for each branch. (See Fig. 4)

Step 5. Plug the power cord into a proper outlet.

Summary of content (2 pages)

PAGE 1
4 ft Warm White Micro dot LED Aspen Fir Potted Tree SKU# 1003142993 Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products, basic precautions should always be followed including the following: READ AND FOLLOW ALL SAFETY INSTRUCTIONS. a) b) This product is for indoor use only. The electrical rating 0.5 A 120 V 60 Hz. c) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use.
PAGE 2
Operation Turning on the tree Step 1. Connect the connector of power cord with connector of tree section well and plug the power cord into a wall outlet. Care and Cleaning Step 1. Remove all ornaments and decorations. Step 2. Unplug the power cord from the wall outlet. And remove your power cord from tree section (A) and save them. Step 3. Gently the tree section (A) straight up to remove from the tree base and fold all branches towards the pole. Step 4.