Use and Care Manual
For technical support and assistance, call 844-894-6659
42
If Reminders are Programmed, These Messages will Appear on a Regular Basis Alternating with Current Water Temperature
Check pH and adjust if required.
Check sanitizer and adjust if required.
Clean or replace the lter if necessary.
Test the GFCI.
The manufacturer requires installation of a Ground Fault Circuit Interrupter by a qualied, licensed electrician. The GFCI is an extremely
important safety device and must be checked on a regular basis to verify its reliability.
Change water to maintain chemical balance and sanitary conditions.
Clean and condition cover for maximum life.
Clean and condition cabinet for maximum life.
Change lter to ensure adequate water ow, optimal performance and sanitary conditions.
Install new mineral cartridge to ensure adequate sanitation.