Use and Care Manual
For technical support and assistance, call 844-894-6659
7
WARNING!
Maintaining Well Balanced Water Chemistry
To reduce the possibility of contracting a waterborne illness, always maintain water chemistry within the parameters in this manual.
Keep the water clean and sanitized with correct chemical balance to help maintain safe water and prevent possible damage to spa
components and bathers. If other bathers are negatively aected, discontinue use and consult a physician. The recommended levels
for your Dr. Wellness Spa are:
Free Available Chlorine (FAC): 3.0 to 4.0 ppm
Free Available Bromine (FAB): 2.0 to 4.0 ppm
Total Alkalinity 80 to 120 ppm
Water pH 7.2 to 7.6
Calcium Hardness 150 to 250 ppm
• Always shower before and after using a spa.
• Refer to Water Chemistry and Maintenance section for further information and complete instructions about water and spa care.
• When adding chemicals, turn the primary pump on for at least ten minutes after adding any spa chemicals into the lter
compartment.
• Replace or clean the lter cartridge regularly to remove debris and mineral buildup which may aect the performance of jets, limit
the water ow, or trip the high limit thermostat which will automatically turn o the entire spa to prevent further damage to the spa.
• Stay out of the spa if you have open wounds or an infections disease.
Safety Information