- HAI (Home Automation Inc.) Home Security System User Manual

Page 19
HAI THERMOSTATS
Omni II supports up to 4 HAI RC-Series Communicating Thermostats. The controller can send commands to the thermostat to
change mode, cool setting, heat setting, status of fan and hold, and other items.
Run a 3 (or 4) conductor wire from Omni II to the thermostat location. All thermostats are connected in parallel to Zone 16 and
Output 8. Connect the red COMM cable wire with the black COMM cable wire. Make the connections (as shown in Figure 10)
using the supplied wire splices.
Y
E
L
L
O
W
G
R
E
E
N
B
L
A
C
K
FIGURE 10 - HAI THERMOSTAT CONNECTIONS