- HAI (Home Automation Inc.) Home Security System User Manual

Page 48
MODEL AND SOFTWARE VERSION
Next, the model number and software version for the system is displayed:
HAI OMNI II
S/W VERSION 2.0 ↕
RESET SYSTEM EEPROM
Select the 1 (YES) key to reset the EEPROM. All programs, names, and setup items will be reset. All system RAM will also be
initialized and the system will restart. This option, if effect, allows the system to be restored to factory fresh configuration.
RESET SYSTEM EEPROM? 0
0=NO 1=YES ↕
RESET SYSTEM RAM
Select the 1 (YES) key to cause all of the system RAM to be reinitialized. The time, date, and event log will be cleared. Other
volatile memory locations will also be reinitialized. The system RAM should only be reset if the system is acting strangely and
memory corruption is suspected. Resetting the system RAM will not reset any setup items stored in EEPROM.
RESET SYSTEM RAM? 0
0=NO 1=YES
↑