Instructions / Assembly

Using a flat head screwdriver, remove the bottom -rail buttons.
Carefully cut the slats through the holes (including the marked slat) to
remove the slats from the blind.Then cut ONLY the outer ladder string.
(Do NOT to cut the inner cord, or the blind will be broken)
Leaving two ladders, one to insert the bottom rail and one to tuck inside the hole.
Ladder
Inner Cord
DO NOT CUT
4
With the one empty ladder, twist the ladder string and insert into the bottom-rail
hole and replace the buttons.
5
Ensure the bottom-rail buttons are secured. Remove the pin from the spring box.
The blind is now shortened to your desired length and can be reinstalled into the
brackets.
6
42”
x1
2Whole Space Ind. Ltd.
3