Allen Wrench Hinge Hinge Screw Wooden Plug Screw
* Before discarding the packing material, please confirm that all parts and hardware are present * Be sure to assemble on a soft, clean surface * Be sure to follow the instructions * You will need two people to assemble this product * A few days after assembly, it might be a good idea to tighten the hardware again
STEP 1 E 3 Assemble the Drawer Front (1), Drawer Sides (2 & 3), Drawer Back (5) and Drawer Bottom (4) by using Screw (E) E F 5 4 E 1 2 G E Install the Handle (G) to the Drawer Front (1) by using Bolt (F) STEP 2 8 C L K J M C B 7 B L K J 6 J K 9 C L B Assemble the Right Front Rail (6), Right Back Panel (7), Middle Panel (8) and Right Side Panel (9) by using Bolt (J), Washer (K & L), Cambolt (A), Camlock (B) and Dowel (C).
STEP 3 A A 9 C B B C C 7 8 C 10 A B 11 C B C A 12 Assemble the Left Side Panel (12), Left Front Rail (10) and Bottom Panel (11) to the unit from STEP2 by using Cambolt (A), Camlock (B) and Dowel (C). STEP 4 Install the Handle (G) to the Keyboard Tray Front Panel (13) by using Bolt (F) Assemble the Keyboard Tray Front Panel (13) to the Keyboard Tray(14) by using Hinge (O) and Screw (P).
STEP 5 16 A B A A C C A B C C B 15 C C A B A B 12 Install the Left Back Panel (15) and Top Panel (16) to the unit from STEP3 by using Cambolt (A), Camlock (B) and Dowel (C).
STEP 6 H D 18 H F 17 Insert the Shelf Support (H) to the holes in the Left Side Panel and the Middle Panel at the same level,then place Adjustable Shelf (17) onto them. Install the Handle (D) to the Door (18) using Bolt (F), then install the Door (18) to the case by using Hinge (N) and Screw (I).
STEP 7 19 Place the assembled drawers, Keyboard Tray into the case; Insert the Plastic Grommet (19) to the back panel.
