Instructions / Assembly

Assembly — Attaching the Fan Blades

Attaching the blades to

the blade arms

WARNING: Failure to properly seat the blades (H) on the

blade arms (I) and engage in the spring locking mechanism

(UU) could result in the fan blades (H) loosening and possibly

falling.

□ Hold the blade (H) with hands close to the blade arm

(I), align the key-slot holes (SS) with the blade arm

posts (TT) and press the blade down ﬁrmly. Ensure

the key-slot holes (SS) are properly seated on the

blade arm posts (TT).

□ Firmly slide the blade (H) away from the blade arm (I)

until the blade (H) engages in the spring locking

mechanism (UU). Make sure the spring of the spring

locking mechanism (UU) is upward and the butt of the

spring locking mechanism (UU) is against the edge of

the blade.

To install the blade to the blade arm:

□ Press down the spring locking mechanism (UU) to

release the blade (H) from the blade arm (I). Slide the

blade (H) toward the blade arm (I) until the blade (H)

disengages from the spring locking mechanism (UU),

carefully push the blade (H) up to detach from the

blade arm (I).

To detach the blade from the blade arm: