Installation Guide

8
Place the Base Assembly (A) onto a at surface.
Insert each Center Foot (O) into the pre-drilled holes
on the bottom of the Base Assembly (A).
3
Attaching the center foot
Put the Left Front Panel (B) down on a at surface.
Insert the Camlock Bolts (DD) into the pre-drilled holes,
using the Phillips Screwdriver.
Repeat this process for the Right Front Panel (C).
Insert the Wood Dowels (HH) into the pre-drilled holes in
the Left Center Panel (D).
Align the Left Front Panel (B) and the
Left Center Panel (D) and push together.
To secure into place, insert the Camlocks (EE) into the
pre-drilled holes and tighten with the Phillips
Screwdriver.
Repeat this process for the Right Front Panel (C) and
Right Center Panel (E).
1
Preparing the front panel
2
Attaching the front panel
C
B
A
O
DD
B
C
E
D
II
HH
EE
Assembly