Instructions / Assembly

5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installation (continued)
□ The electronic endcap is tethered to the motor module.
Carefully fold any excess tethered wire in the open space
between the spring box end of the head rail.
□ Make sure the electronic endcap control button is facing out.
□ Align the tabs in the end cap with the grooves on the sides of
the head rail. Push the end cap into place, making sure the
cable is not pinched.
□ Replace the head rail cover across the entire length of the
head rail and install one of the cellular shade endcaps to close
the remaining open end.
□ Install the Home Decorators Collection Smart Home
Compatible Cellular Shade according to the instructions
provided by the shade’s manufacturer.
□ BLUETOOTH
®
wireless technology communication / pairing
required with pre-installed motor module.
CAUTION: After the motor module has been installed, DO
NOT attempt to pull the shades open or closed by hand. Doing
so may cause damage to the shade.
WARNING: DO NOT PULL THE SHADE AFTER THE MOTOR IS INSTALLED.
IMPORTANT: Motor will not operate the shade until paired and calibrated.
Pairing and calibration can be performed using the FREE App or with the
optional remote control.
Download the App or review the instruction manual for the
optional remote control to get started.
NOTICE: Pulling the shade manually by hand
will clear the upper/lower limit settings
and require re-calibration.