Instructions / Assembly

19 20

When inserting the drawer box, fully extend each

hinge on the main assembly. This will ensure that the

drawer slides into place properly.

Attaching the drawer

Locate the Left Door (P) and Right Door (Q).

Attach the Hinges (MM) on the upper and lower

corners of each Door (P, Q) by lining up each

hinge with the pre-drilled holes as shown in the

diagram.

Secure each Hinge (MM) using the Screws (NN)

and a Phillips screwdriver.

Attaching the door hinges

Attach the Black Plastic Brackets (KK) onto the inside

of the drawer assembly as shown using the Screws

(JJ) and a Phillips screwdriver.

Locate the Drawer Front (O).

Align the pre-drilled holes on the Drawer Front (O) with

the brackets inside the drawer.

From inside the drawer, secure the brackets onto the

Drawer Front (O) using the Screws (LL) and a Phillips

screwdriver.

Attaching the drawer brackets

Assembling the drawer box

Assembly (continued)

P Q