Instructions / Assembly

3 4

Using the Left Side Panel (B) and the Base Rails (D,E),

align the pre-installed dowels and cam lock screws

into the holes. Press together to secure the wooden

dowels.

Secure by inserting Cam Lock Connectors (CC) into

the pre-drilled holes as shown.

Use a Phillips screwdriver to tighten all Cam Lock

Connectors (CC).

Repeat to secure the Right Side Panel (C).

Assembling the side panels

Locate the Top Panel (G) and place onto a at

surface.

Insert the Cam Lock Screws (BB) into the

pre-drilled holes in the bottom of the Top Panel

(G). Tighten using a Phillips screwdriver.

Preparing the top assembly

Locate the Left Side Panel (B) and the

Right Side Panel (C).

Insert Cam Lock Screws (BB) into the pre-drilled holes

in each panel (B,C) and secure using a Phillips

screwdriver. Repeat until all Cam Lock Screws (BB)

have been installed as shown.

Locate the Base Front Rail (D) and the Base

Back Rail (E).

Insert Wood Dowels (DD) into the pre-drilled holes on

the edges of each Rail (D,E) as shown.

Preparing side panels for assembly

Preparing the back apron

Assembly