Installation Guide

Assembly — Hanging the Fan (continued)

Installing the canopy

WARNING: The locking slots of the canopy (C) are provided

only as an aid to mounting. Do not leave the fan assembly

unattended until all four canopy mounting bracket screws

(BB) are engaged and ﬁrmly tightened.

WARNING: Make sure the tab on the mounting bracket (A)

properly sits in the groove in the hanger ball/downrod

assembly (D) before attaching the canopy (C) to the mounting

bracket (A) by turning the canopy (C) until it drops into place.

□ Slide the canopy (C) up to the ceiling. Make sure you

have placed the wires safely into the outlet box (TT).

□ Secure the canopy (C) to the mounting bracket (A)

with the four canopy mounting bracket screws and

lock washers (BB) included with your fan.

□ Raise up canopy ring (B) and line up the four tabs

with the four grooves on the canopy (C). Once lined

up, slide the canopy ring (B) and secure it to the

canopy (C) until snug.