Installation Guide

Attaching the blades

to the blade arms

Fastening the blade

assemblies to the motor

WARNING: To reduce the risk of personal injury, do not

bend the blade arms (K) while installing, balancing the blades

(J), or cleaning the fan. Do not insert foreign objects between

rotating fan blades (J).

□ Attach the blades (J) to the blade arms (K) using the

three blade attachment screws and rubber washers

(CC) and the medallions (I). Start a screw and rubber

washer (CC) into a medallion (I), but do not tighten.

□ Repeat for the two remaining blade attachment

screws and rubber washers (CC).

□ Tighten each screw securely starting with the center

screw. Make sure the blade (J) is straight.

□ Repeat these steps for the remaining blades (J).

□ Align the holes from the blade arm (K) to the holes

from the motor (H), and secure the blade arm in place

with screws and washers (DD) provided.

□ Repeat this process to attach the other blades (J).

Assembly — Attaching the Fan Blades

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.