Installation Guide

□ Remove the two remote control holder plugs (FF) from the

remote control holder (Q). Note that the plugs have unique

tabs that allow them to ﬁt only in one hole.

□ Attach the remote control holder (Q) with the two remote

control holder mounting screws (EE).

□ Replace the two remote control holder plugs (FF) each into its

own hole.

15 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

INSTALLING THE REMOTE CONTROL HOLDER

Operation

REMOTE CONTROL OPERATING INSTRUCTIONS

□ Install the 12V MN21/A23 battery (OO) (included) into the

remote control (P). To prevent damage to the remote control

(P), remove the battery if not used for long periods.

□ Restore power to the ceiling fan and test for proper operation.

HI, MED, LOW buttons: Sets the fan speed.

OFF button: Turns the fan off.

button: Turns the light on or off and also controls the

brightness setting. Press and release this button to turn the light

on or off. Press and hold the button to set the desired brightness.

The light button has an auto-resume, it will stay at the same

brightness as the last time it was turned off.

button: Set the fan forward or reverse, press the button

forward (for warm weather) or reverse (for cool weather)