Installation Guide

Installing the mounting bracket

to the electrical box

Hanging the fan to the mounting

bracket

Assembly — Hanging the Fan

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

WARNING: To reduce the risk of ﬁre, electric shock or

other personal injury, mount the fan only to an outlet box or

supporting system marked acceptable for fan support and

use the mounting screws provided with the outlet box.

□ Pass the 120-volt supply wires through the center

hole in the mounting bracket (A).

□ Attach the mounting bracket (A) on the outlet box (TT)

by sliding the mounting bracket (A) over the screws

provided with the outlet box (TT). Note that the ﬂat

side of the mounting bracket (A) is toward the outlet

box (TT).

□ Securely tighten the two mounting screws.

□ Carefully lift the fan motor assembly (H) up to the

mounting bracket (A) and seat the hanger

ball/downrod assembly (D) in the mounting bracket

(A) socket. Make sure the tab on the mounting

bracket (A) socket is properly seated in the groove in

the hanger ball/downrod assembly (D). This will help

to balance the ceiling fan.

WARNING: The tab in the ring must rest in the groove of

the hanger ball/downrod assembly (D). Failure to properly

seat the tab in the groove could cause damage to the wiring.