Use and Care Manual

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Attaching door handles

Attaching the cabinet door

Assembly (continued)

Locate the Cabinet Doors (N and O).

Each Door Handle (GG) has pre-attached screws.

Remove these screws and place handles over the

pre-drilled holes in each Cabinet Door (N and O).

Place the pre-attached screws on the other side

of the Cabinet Doors (N and O) and tighten with a

Phillips screwdriver through the door and into the

handle.

Lift the Cabinet Door (N) and align the hinges with the pre-

attached hardware on the main assembly as shown.

Slide the pins of the hinge on the door downward into the

barrel of the hardware on the main assembly.

Repeat steps with Cabinet Door (O).