Use and Care Manual

8
1
Attaching the center replace surround
2
Attaching the base
Assembly
Locate the Top Surround Rail (C) as well as the Left and
Right Partitions (B and D).
Align the Top Surround Rail (C) between the Left and
Right Partitions (B and D). Push together, inserting the
pre-installed dowels on the Top Surround Rail (C) into
the holes on the Left and Right Partitions (B and D) as
shown.
Insert Screws (BB) through the pre-drilled holes on the
edges of Partitions (B and D) and Metal Plate (LL) as
shown.
Align the Bottom Shelf (A) with the center of
assembly from step 1.
Insert Screws (AA) through the Bottom Shelf
(A) and into the pre-drilled holes on the edges
of the center assembly as shown.
Securely tighten using a Phillips screwdriver.
BB
LL
C
A
D
B
AA