Instructions / Assembly

Installation
5
2
Attaching the mounting unit and
canopy to the junction box
 Attach the mounting unit (AA) to the junction box (not
included) with the mounting screws (BB) and remove the
pre-installed screw collar ring.
 Place the canopy (C) over the pre-installed screw collar loop
on the mounting unit (AA). Turn the screw collar ring until
1/2 of the screw collar loop threads are exposed.
 Use a pair of pliers and a screwdriver (not included) to open
the end link of the chain (B). Use a cloth on the pliers to
protect the finish. Secure the chain (B) to the screw collar
loop on the mounting unit (AA) and the top loop of the light
fixture (A). Lower the screw collar ring and canopy (C) over
the chain (B).
 Weave the electrical wires, ground wires and safety cable
through the chain (B), screw collar loop, canopy (C) and
through the center of the mounting unit (AA).
AA
C
BB
B
B
C
AA
1
Assembling the light fixture
 Screw the loop (D) to the top of the light fixture (A).
 Secure the chain (B) to the loop (D) on the light fixture (A).
B
D
A
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS