Item # 733 992 Model #17108 USE AND CARE GUIDE 3-LIGHT PENDANT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this light fixture. We strive to continually create quality products designed to enhance your home.
Table of Contents Hardware Included ...................................................................3 Package Contents ....................................................................4 Installation ..................................................................... 5 Care and Cleaning ........................................................ 8 Troubleshooting ............................................................ 8 Service Parts .................................................................
Pre-Installation PLANNING INSTALLATION Read all instructions before installing. To avoid damaging this product, place it on a soft, non-abrasive surface, such as carpet or cardboard. IMPORTANT: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please call the Customer Service Team at 1-800-986-3460.
Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G H Part A B C D Description Canopy Chain Loop Column Quantity Part 1 1 1 1 E F G H 4 Description Arm Shade assembly Threaded pipe Glass diffuser Quantity 3 1 1 1
Installation 1 Installing the mounting bracket 2 Attaching the canopy to the outlet box Fasten the mounting bracket (AA) onto the outlet box using two outlet box screws (GG). Screw the threaded tube (BB) into the mounting bracket (AA), and secure it using the lock washer (CC) and hex nut (DD). Place the canopy (A) over the threaded tube (BB), and screw the screw collar loop (HH) onto the threaded tube (BB). Secure the canopy (A) using the ring (II).
Installation (continued) 5 Weaving the fixture wire Unscrew the ring (II) from the screw collar loop (HH), and lower the canopy (A) and ring (II) over the chain (B) on the fixture. Weave the fixture wires and bare copper ground wire up through the chain (B), ring (II), canopy (A), screw collar loop (HH), threaded tube (BB), and then into the outlet box. BB HH B A II 6 Making the electrical connections Strip 3/4 in. of insulation from the wire ends.
Installation (continued) 7 8 Installing the canopy to the outlet box Installing the light bulbs Install the bulbs (not included) into the sockets. Use three 60-watt maximum medium base (E26) type A bulbs. Raise the canopy (A) all the way up to the ceiling, and tighten the ring (II) onto the screw collar loop (HH) until the canopy (A) is firmly held against the ceiling. NOTE: You can also use three 13W maximum medium base (E26) SBCFLs (sold separately). Do not exceed the recommended wattage.
Care and Cleaning Do not use any cleaners with chemicals, solvents, or harsh abrasives. Use only a dry, soft cloth to dust or wipe carefully. To clean the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box, and use a dry or slightly dampened, clean cloth to wipe the exterior surface of the fixture. Troubleshooting Problem Possible Cause Solution The lights will not turn on. The bulb is burned out. Replace the light bulb. The power is off.
Service Parts MODEL : 17108 BB AA FF EE KK GG LL Part Description AA BB Mounting bracket Threaded screw Lock washer Hex nut Green ground screw (Pre-assembled to mounting bracket (AA)) CC DD EE FF GG HH II JJ KK LL MM NN OO A B C D E F G H CC DD MM JJ II HH OO NN A B Wire connector Outlet box screw Screw collar loop Ring (Preassembled to screw collar loop (HH)) Thumb screw (Preassembled to column (D) and shade assembly (F)) Rubber washer Metal washer Hex nut Metal cap Finial Canopy C D
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo # 733 992 Modelo # 17108 GUÍA DE USO Y MANTENIMIENTO LÁMPARA COLGANTE DE 3 LUCES ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS GRACIAS POR TU COMPRA. Apreciamos la confianza que has depositado en Home Decorators Collection al comprar esta lámpara.
Índice Herramientas Incluidas..............................................................3 Contenido del Paquete...............................................................4 Instalación....................................................................... 5 Mantenimiento y Limpieza............................................. 8 Solución de Problemas...................................................8 Piezas de Remplazo....................................................... 9 Modelo....................
Pre-Instalación PLANIFICACIÓN DE LA INSTALACIÓN Lea todas las instrucciones antes de comenzar la instalación. Para evitar dañar el producto, colócalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. IMPORTANTE: Revisa que el aislamiento de los cables no haya sufrido ningún corte, abrasión ni tenga filamentos de cobre expuestos debidos al envío. Si hay un defecto en el cable suspenda el ensamblaje. Por favor llama a nuestro Equipo de Servicio al Cliente al 1-800-986-3460.
Pre-Instalación (continuación) CONTENIDO DEL PAQUETE A B C D E F G H Pieza A B C D Descripción Dosel Cadena Argolla Columna Cantidad Pieza 1 1 1 1 E F G H 4 Descripción Brazo Conjunto de la pantalla Tubo roscado Difusor de vidrio Cantidad 3 1 1 1
Instalación 1 Instalando el soporte de montaje 2 Fije el soporte de montaje (AA) a la caja eléctrica usando los dos tornillos de la caja eléctrica (GG). Enrosque el tubo roscado (BB) en el soporte de montaje (AA), y asegúrelo usando la arandela de seguridad (CC) y la tuerca hexagonal (DD). Adjuntando el dosel a la caja eléctrica Coloque el dosel (A) sobre el tubo roscado (BB), y enrosque el gancho de sujeción (HH) en el tubo roscado (BB). Asegure el dosel (A) usando el anillo (II).
Instalación (continuación) 5 Entrelazar los cables Desenrosque el anillo (II) del gancho de sujeción (HH), y baje la cubierta del ensamblaje (A) y el anillo (II) a través de la cadena (B) de la lámpara. Entrelace los cables de la lámpara y el cable de tierra a través de la cadena (B), el anillo (II), el dosel (A), gancho de sujeción (HH), tubo roscado (BB), y a la caja eléctrica. BB HH B A II 6 Realizar la conexión eléctrica Pelar el aislamiento del extremo de los cables 3/4 pulgada.
Instalación (continuación) 7 8 Instalación del dosel a la caja eléctrica Instalación de la bombilla Instale las bombillas (no incluidas) en los receptáculos. Use tres bombillas de base mediana (E26) de tipo A de 60-watts máximo. Suba el dosel (A) hasta llegar al techo, asegure el anillo (II) en el gancho de sujeción (HH) hasta que el dosel (A) esté firmemente adherido al techo. NOTA: También puede utilizar tres bombillas fluorescente compactas de 13W máximo de base mediana (E26) (no incluidas).
Mantenimiento y Limpieza No use limpiadores con químicos, solventes ni productos abrasivos. Use sólo un paño suave y seco para desempolvar o limpiar con cuidado. Para limpiar la lámpara, primero corta el suministro de electricidad, apagando el interruptor automático o retirando el fusible correspondiente en la caja de fusibles. Seguidamente, usa un paño limpio, seco o ligeramente húmedo (usa sólo agua limpia, nunca un solvente) para limpiar el exterior de la lámpara.
Piezas de Remplazo MODELO : 17108 BB AA FF EE KK Pieza AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO A B C D E F G H GG LL CC DD MM JJ II HH OO NN A Descripción Soporte de montaje Tubo roscado Arandela de seguridad Tuerca hexagonal Tornillo verde a tierra (Preinstalado al soporte de montaje (AA)) B Conector de cable Tornillo de la caja eléctrica Gancho de sujeción Anillo ( Preinstalado al gancho de sujeción (HH)) Tornillo de mariposa ( Preinstalado a la columna (D) y al conjunto de la camp
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al Servicio al Cliente de Home Decorators Collection, de 8 a.m. a 7 p.m., hora estándar del Este, de Lunes a Viernes, y de 9 a.m. a 6 p.m., hora estándar del Este, Sábados. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para referencias futuras.