Installation Guide

Table Of Contents

Assembly - Hanging the Fan

Attaching the fan to the electrical

box

Hanging the fan

□ Pass the 120-Volt supply wires through the center hole in the

mounting bracket (A).

□ Install the ceiling mounting bracket (A) on the outlet box (MM) by

sliding the mounting bracket (A) over the two screws (LL) provided

with the outlet box (MM). If necessary, use leveling washers (not

included) between the mounting bracket (A) and the outlet box

(MM). Note that the at side of the mounting bracket (A) is toward

the outlet box (MM).

□ Securely tighten the two mounting screws (LL).

□ Carefully lift the fan motor assembly (E) up to the mounting

bracket (A).

□ Seat the hanger ball portion of the ball/downrod assembly

(B) in the mounting bracket (A) socket. Ensure that the tab

on the mounting bracket (A) socket is properly seated in the

groove in the hanger ball.

1 2

WARNING: To reduce the risk fo re, electric shock or personal

injury, mount to outlet box marked “acceptable for fan support

of 35 lbs (15.9 kg) or less”, and use screws provided with the

outlet box.