Installation Guide

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Installing the Light Kit

Attaching the light kit pan

Attaching the light kit tter assembly

1 2

□ Remove one screw (NN) from the black bracket below the

fan motor assembly (E). Loosen, but do not remove the

other two screws.

□ Push the light kit pan (F) up to the fan motor assembly (E)

so that the two loosened screw heads t into the keyhole

slots. Turn the light kit pan (F) to secure.

□ Re-install the screw (NN) that was removed in step 1.

□ Make sure all the screws are rmly tightened.

□ Remove one screw (SS) from the light kit pan (F). Loosen,

but do not remove the other two screws.

□ Connect the blue wire exiting the bottom of the fan motor

assembly (E) with the black wire from light kit tter

assembly (G).

□ Connect the white wire exiting the bottom of the fan motor

assembly (E) with the white wire from the light kit tter

assembly (G).

□ Push the light kit tter assembly (G) up to the light kit

pan (F) so that the two loosened screw heads t into

the keyhole slots. Turn the light kit tter assembly (G) to

secure.

□ Re-install the screw (SS) that was removed in step 1.

□ Make sure all the screws are rmly tightened.

CAUTION: To reduce the risk of electric shock, disconnect

the electrical supply circuit to the fan before installing the

light kit.

WARNING: Do not overtighten when installing the glass

shade into the light kit assembly. Allow the glass shade to

cool completely before removing.

Installing the light bulbs and

glass bowl

□ With the power off, install the two LED bulbs (J)(Max, 9.5W

provided) into the light bulb sockets.

□ Place the glass bowl(I) into the light kit pan (F), aligning the

three at areas on the top ange of the glass bowl (I) with

the three raised dimples in the light kit pan (F). Turn the glass

bowl (I) clockwise until it stops.