Instructions / Assembly

BB
AA
G
I
G
4
Installing the tabletop
5
Installing the bracket
6
Standing the table up and putting on the lid
□ Link Bracket (G) to the left and right side panels with bolts (AA) and gaskets (BB).
□
□
Carefully turn the entire unit to stand straight up.
Cover the re pit using the lid (I).
8
Assembly (continued)
□
□
□
□
□
□
Place the tabletop (F) face down on a non-abrasive surface.
Place the four panels of the frame (A, B, C, and D) on top of
the upside-down tabletop.
Align the peg which is mid-way down the rod at the
top of the back panel (D) with the hole underneath
the tabletop (F) as shown in the circle.
Align the holes of the four frame posts with
the holes on the four corners of the tabletop (F).
Use bolts (CC) and gaskets (DD) to attach the
frame to the tabletop (F) in all four corners.
Tighten fully with the Allen key (EE).
CC
DD
D
F
F