Instructions / Assembly

ASSEMBLY INSTRUCTIONS
(We recommend wearing proper clothing in order
to prevent scratches that may occur during the
assembly process.)
Carefully unpack all Wreath components from the
carton (Fig 1). Your Wreath should include the
following:
1 Wreath folded in half.
1 Bag of wing nuts.
1. Leave assembled if storage room permits or disassemble, placing all components in the original
carton.
2. Store in cool, dry location away from sunlight.
STORAGE INSTRUCTIONS
LED23
ASSEMBLY OF THE WREATH
1. Unfold your wreath facing it down (Fig 2).
SHAPING OF THE WREATH:
Begin to gently bend and shape the branche tips;
spreading the flexible branch tips into a circular
wreath shape.
You have completed the assembly of the wreath.
2. Twist the 2 wing nuts to secure the wreath in the
open position (Fig 3).
3. Once the 2 joints have been secured flip your wreath
over so the front is facing you (Fig 4).
Thank you for your purchase.
With proper use and care, this pre-lit wreath will
provide years of trouble-free enjoyment.
WREATH
Model No. 23LE31103
SKU No. 1009383439
Made in China
Printed in China
This is not a toy, for decorative use only.
DISTRIBUTED BY HOME DEPOT U.S.A., INC. 2455
PACES FERRY RD., N.W. Atlanta, GA 30339 All rights reserved.
Fig 1
Wing nuts
Fig 2
Fig 3
Fig 4
MANUAL OPERATION:
1. THE PLUG’S CONTROL BUTTON
1. The below pre-set color & function listing is available
without attaching to the “HUBSPACE” account by use
of the wreath’s plug control button (Fig 5).
2. This button allows for “On” & “Off” manual operation
of the wreath’s lighting system. (The green light, on
the control button, indicates that the wreath is in the
“On” position.
3. Pressing & holding the button for 2-3 seconds will
place the wreath’s lighting system in the “Off”
position. (The control button will remain dark, when in
the “Off” position).
NOTE: When in the “On” position, continued/short
pressing & releasing of the wreath’s control button
will allow for the user to manually cycle through 30 of
the wreath’s available 43 pre-set colors & “themed”
function combinations
.
2. CONNECTING TO THE HUBSPACE APP
1. Ensure that the wreath’s lighting is in the “On” position.
2. Scan the QR code, located directly on the of the wreath’s
control plug (Fig 6).
3. On the App’s main screen, tap the “+” button in the upper right
corner. Once the next screen appears, select “Add Device”.
4. Follow the instructions within the App.
NOTE: An additional QR code is provided – affixed onto the
“HUBSPACE Quick Start Guide”. Follow these easy setup
instructions.
NOTE: “HUBSPACE” needs a connection before you can utilize the
product.
Go to your phone’s “Settings” and turn on the “Bluetooth”.
• HUBSPACE only shows Wi-Fi networks that your device can use.
• If you do not use your Wi-Fi network name when your attempt
to connect your device, please check your router settings.
3. FEATURES OF THE HUBSPACE APP
1. The HUBSPACE APP will enable you to:
• Change the color. brightness, and other settings of each
individual
bulb on the string light set to an RGB or white color.
• Create unique light and color patterns or use any of the preset
options.
• Set day and time timers to activate/deactivate the string light.
• Create groups of string lights or link them with other HUBSPACE
devices.
2. Set up your voice assistant on the Intergrations tab. Choose
Amazon Alexa or Google Assistant and follow the instructions to
manage your devices through voice control.
IMPORTANT: The QR codes are unique to this string light device
and will not add other devices or products to your HUBSPACE
account.
Fig 6
1. Steady - Warm White.
2. “Christmas”.
3. “Hanukkah”.
4. “Mistletoe”.
5. “Tinsel”.
6. “Santa’s Party”.
7. “North Pole”.
8. “Rainbow Rudolf”.
9. “Snowflake”.
10. “Snowfall”.
11. “White Star”.
12. “Penguin Disco”.
13. “Valentine’s Day”.
14. “St. Patrick’s Day”.
15. “Easter Eggs”.
16. “Cinco de Mayo”.
17. “July 4
th
”.
18. “Firework”.
19. “Halloween”.
20. “Halloween 2”.
21. “Rainbow”.
22. “Double Rainbow”.
23. “Rainbow Road”.
24. “Prism”.
25. “Under the Sea”.
26. “Effervescent”.
27. “Red Shift”.
28. “Vote of Confidence”.
29. “Ping”.
30. “Monday”.
Fig 5
This product was pre-tested before shipment and date coded. In keeping with the National Electric Code, this
product is intended for seasonal (90 days max.) installation and use. For problems or questions on this product call
our customer service toll-free at 1-877-592-5233.
TROUBLESHOOTING
Problem Possible Cause Solution
The entire light set will not
turn ON.
Power to the light set is OFF. Ensure that the power source is active, and
the AC plug is properly connected.
There is damage to the contoller
or its electrical connection.
The light set is not properly
connected to the controller.
The power wire is grounded out,
or there is another electical fault
at the AC plug.
My HUBSPACE device is not
connecting to Wi-Fi.
Make sure your device is connected to a
power source. Your Internet connection or
Wi-Fi network may be down.
Make sure you have a 2.4GHz capable Wi-Fi
network within range of the device you are
trying to add.
Yes. Use the app on a phone with an Internet
connection like LTE. The phone must be
within Bluetooth range of your HUBSPACE
device and have Bluetooth enabled.
Scan the QR code and it will transfer to your
account.
No. Each product has a unique QR code.
• Make sure the device is connected to power.
Press and hold the wreath’s plug control
button for 5 seconds (Fig 5), the lights will
then pulsate, indicating it is in “Setup”
mode, allowing the user to add the device.
• In the HUBSPACE app, tap +, then Add Device.
• On the Scan Device screen, tap the Search
button in lower right corner.
• Follow the instructions on-screen.
Make sure your Wi-Fi signal strength is
sufficient. You may need to move your
router, use mesh Wi-Fi, or Wi-Fi extenders.
Turn off Bluetooth on your phone and turn it
back on. Then, scan the QR code. If the
problem persists, turn your phone off and
on, then try again.
My device cannot find any Wi-Fi
networks.
My device is in a location that
does not have Wi-Fi. Can I still use
it with the HUBSPACE APP?
A device is on another account.
How do I transfer it?
My device is offline for long
periods of time.
Can I scan the same QR code to
add multiple products?
The device is on and I scanned
the QR code, but the app cannot
connect to it.
Discontinue use of the product. Call the
Customer Care Service Team at
1-877-592-5233.
Ensure that the connection between the
light set and the controller is tight and
secure. Press the connections together, and
thread the connector cap of the light set
clockwise onto the controller connection.
Discontinue use of the product. Check the
wire connections. Contact a qualified
electrician or call the Customer Service
Team at 1-877-592-5233.
The circuit breaker trips
when the product is turned
ON.
Connecting to the
HUBSPACE APP.
A QR code scanning issue, when
attempting to add the product.
QR code is damaged,
Inaccessible, etc.
Upon failed attempts to Scan the QR code, a
24-character code will appear below the QR
Code. Enter said code and proceed.
QR CODE is not available,
missing or cannot Scan.
18.25”
11.5”
2023 Home Depot.com
Hubspace 36in Waldorf Fir Wreath - Instruction Sheet - English
Date: 4/11/2023