Use and Care Manual

Afxing the pilasters to the side panels

□ Insert two dowels (CC) into the predrilled holes in the right

lower side panel (L). Secure the right front pilaster (J) using

bolts (AA) and washers (BB) as shown. Repeat using the left

lower side panel (K) and the left front pilaster (H).

Installation

Attaching the side panel assemblies

to the base

□ Lay the base (B) on a smooth, at surface. Insert three

dowels (CC) into predrilled holes on the left side of the

base (B). Slip the left side assembly over dowels (CC)

until snug and secure using bolts (AA) and washers (BB).

Repeat using the right side assembly.

Installing the front rail

□ Insert two dowels (CC) into the predrilled holes in the top

edge of each of the assembled pilasters. Slip the front

rail (G) over the dowels until snug.

Attaching the media shelf

□ Insert four dowels into the predrilled holes in the top left

and right edges of the cabinet assembly. Slip the media

shelf (C) over the dowels (CC) until snug. Secure the

media shelf (C) and the front rail (G) using bolts (AA) and

washers (BB) from inside the cabinet assembly as shown.