Installation Guide
5
1
Attaching the hairpin legs
2
Attaching the felt pad
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-998-7021 for further assistance.
Installation – [Two leg option]
□ Install each hairpin leg matching corner of the
leg into corner of the vanity.
□ Provide sufcient protection on the oor to
protect the vanity from damage.
□ Tilt the vanity backwards and position the hairpin
legs (A), aligned over the pre-drilled holes.
□ Attach hairpin legs to the vanity using the
4 x 16mm screws (not included). Ensure all the
screws are tightened properly.
□ With assistance, turn the vanity upright to rest on
its legs.
□ Place the vanity base on the desired location and mark the felt pad location on the oor. Remove the vanity and stick the hairpin
leg felt pad (B) to the oor. Place the vanity on the felt pad (B).
B
A