Instructions / Assembly

10
Assembly - Standard Ceiling Mount (continued)
Mounting the fan
7
WARNING: When using the standard ball/downrod mounting, the
tab in the ring at the bottom of the mounting bracket must rest in
the groove of the hanger ball. Failure to properly seat the tab in
the groove could cause damage to the wiring.
B
AA
AA
C
E
Attaching the fan blades
8
□
Attach the fan blades (A) to the fan motor assembly (G)
by using the blade screws (BB) and fiber washers (CC).
Tighten blade screws (BB) securely.
□
Repeat these steps for the remaining blades (A).
□
Installing the bottom cover
9
Place the bottom cover (H) into the fan motor assembly (G)
and rotate securely.
BB
CC
A
F
G
G
H
G
□ Align the locking slots of the ceiling canopy (C) with the two
canopy screws (AA) in the mounting bracket (B). Push up tor
engage the slots and turn clockwise to lock in place.
□ Firmly tighten the two canopy screws (AA).
□ Install the two canopy screws (AA) (saved from Assembly
Step 1 “Preparing for mounting”) into the holes in the
canopy (C) and tighten firmly.