Instructions / Assembly

11
Assembly - Flushmount
Preparing for mounting Routing the wires
1 2
□
□
□
C
G
□
Loosen the two canopy screws (AA) located in the “L
shaped” slots.
□ Remove and save the two canopy screws (AA) in the round
holes.
□ Remove the decorative canopy bottom cover from the
canopy (C).
Loosen three mounting screws (II) in the coupler located
on the top center of the motor housing until the inside
channel is clear.
Remove and save the set screws (GG) from the coupler.
Place the ceiling canopy (C) on top of the motor housing
and secure with the three mounting screws (II).
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
AA
AA
C
G
WARNING: Make sure power is off before attempting
installation.
II
II
C
GG