Full Product Manual

• Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or

switching off circuit breaker).

• Installing a fixture into an electrical system without a proper grounding could allow all metal parts of the

fixture to carry an electrical current if any of the fixture wires, wire connections or splices become broken, cut

or loose during the mounting or normal operation of the fixture. Under this condition, anyone coming in

contact with the fixture is subject to electrical shock, which could cause serious injury or death.

• Be careful not to damage or cut the wire insulation (covering) during fixture installation. Do not permit wires

to contact any surface having a sharp edge. To do so may damage or cut the wire insulation, which could

cause serious injury or death from electric shock.

ASSEMBLY INSTRUCTIONS

1. Remove the mounting plate from the fixture.

2. Connect the ground wire to the mounting strap by securing it with the ground screw.

3. Connect the positive, negative and ground wires with the supplied wire nuts.

4. Attach the mounting plate to the junction box. Connect the fixture to the mounting plate.

5. Screw bulbs into each socket.

CARE AND MAINTENANCE

• To clean, unplug lamp and wipe with a damp non-abrasive cloth.

• Replace bulbs as required with halogen 10 watt G4 bulbs.

WARRANTY: The manufacturer warrants all of its lighting fixtures against defects in materials and workmanship for one (1) year

from the date of purchase. If within this period the product is found to be defective in material or workmanship, please contact the

manufacturer, a copy of the original sales receipt will be required as proof of purchase. The manufacturer will, at its option, repair or

replace the product. This warranty does not cover fixtures becoming defective due to misuse, accidental damage, improper

handling and/or installation and specifically excludes liability for direct, incidental or consequential damages. As some states do not

allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply to you. This warranty

gives you specific legal rights, and you may have other rights that vary from state to state.

WARNING:

ASSEMBLY INSTRUCTIONS MODEL#: MDN-1144

PAGE 1
ASSEMBLY INSTRUCTIONS MODEL#: MDN-1144 WARNING: • Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). • Installing a fixture into an electrical system without a proper grounding could allow all metal parts of the fixture to carry an electrical current if any of the fixture wires, wire connections or splices become broken, cut or loose during the mounting or normal operation of the fixture.
PAGE 2
INSTRUCCIONES DE ENSAMBLAJE MODELO#: MDN-1144 ADVERTENCIA: • Desconecte la electricidad en la caja de fusibles (o el cajetín del interruptor de circuitos) antes de comenzar la instalación, apagando el interruptor de circuitos o retirando el fusible.