Use and Care Guide

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Assembly - Attaching the Fan Blades

Mounting the fan-motor assembly

(standard mount)

Attaching the blades to the blade

brackets

□

Attach a blade (G) to blade bracket (F) by inserting the

screws (DD) into the holes in the blade (G) and through

the blade bracket (F).

□

Tighten each screw securely.

□

Repeat this step for each blade and blade bracket.

□

Align the locking slots of the canopy (C) with the two

screws (HH) and alignment post (KK) in the mounting

bracket (A).

□

Push up the canopy (C) and turn clockwise until the

alignment post (KK) engage to the round hole and the

screws (HH) engage to the key slots.

□

Firmly tighten the two mounting screws (HH).

□

Install the decorative bottom cover (JJ) by aligning the

cover slots with screws in the bottom of the canopy (C).

Rotate the bottom cover (JJ) clockwise to lock in place.

Fastening the blade assemblies to

the motor

□

Insert the blade/ blade bracket assembly through the hole in the

side of the center ywheel on the fan-motor assembly (E).

□

Align the two screw holes in the blade bracket (F) with the

screw holes in the center ywheel and secure with screws (EE).

□

Repeat these steps for the remaining blades.

NOTE: Your fan blades are reversible. Select the blade side nish

which best accentuates your decor.

Assembly - Hanging the Fan (continued)