Use and Care Guide

2
T
able of Contents
................................................................ 2
Safety Information
............................................................... 2
W
arranty
............................................................................... 3
Pr
e-Installation
.................................................................... 3
Installation
............................................................................ 6
Assembly .............................................................................. 7
Operation
........................................................................... 13
Car
e and Cleaning
............................................................. 15
T
roubleshooting
................................................................. 15
1
.
T
o reduce the risk of electric shock, ensure the electricity has been
turned off at the circuit breaker or fuse box before you begin.
2.
All wiring must be in accordance with the National Electrical Code
ANSI/NFP
A 70-1999 and local electrical codes. Electrical installation
should be performed by a qualified licensed electrician.
3.
The outlet box and support structur
e must be securely mounted and
capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet
boxes marked “Acceptable for Fan Support of 35 lbs (15.9 kg) or less.”
4.
The fan must be mounted with a minimum of 7 ft. (2.1 m) clear
ance
from the trailing edge of the blades to the oor.
5.
Do not oper
ate the reversing switch while the fan blades are in
motion. You must turn the fan off and stop the blades before you
reverse the blade direction.
6.
Do not place objects in the path of the blades.
7
. To avoid personal injury or damage to the fan and other items, use
caution when working around or cleaning the fan.
8. Electrical diagrams are for reference only. Light kits that are not
packed with the fan must be UL-listed and marked suitable for use
with the model fan you are installing. Switches must be UL General
Use Switches. Refer to the instructions packaged with the light kits
and switches for proper assembly.
9. After making electrical connections, spliced conductors should be
turned upward and pushed carefully up into the outlet box. The
wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box.
10. All setscrews must be checked and retightened where necessary
before installation.
W
ARNING: To reduce the risk of personal injury, do not
bend the blade brackets (also referred to as anges) during
assembly or after installation. Do not insert objects in the
path of the blades.
W
ARNING: Remove the rubber motor stops on the bottom of
the fan before installing the blades or testing the motor.
WARNING: To reduce the risk of re or electric shock, this
fan must be installed with an isolating wall switch.
W
ARNING: To avoid possible electrical shock, turn the
electricity off at the main fuse box before wiring. If you
feel you do not have enough electrical wiring knowledge or
experience, contact a licensed electrician.
W
ARNING: Electrical diagrams are for reference only.
Optional use of any light kit shall be UL-listed and marked
suitable for use with this fan.
W
ARNING: To reduce the risk of re, electric shock, or
personal injury, mount to outlet box marked “Acceptable
for fan support of 35 lbs. (15.9 kg) or less,” and use the
screws provided with the outlet box.
Safety Information
T
able of Contents
READ AND
SAVE THESE INSTRUCTIONS
W
ARNING: To reduce the risk of re or electric shock, this fan
should only be used with fan speed control part no. AP-8RDL
manufactured by Dawnsun Electronic Co., LTD.
CAUTION: To reduce the risk of personal injury, useonly the
screws provided with the outlet box.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
□ Reorient or relocate the receiving antenna.
□ Increase the separation between the equipment and receiver.
□ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
□ Consult the dealer or an experienced radio/TV technician for help.
manufactured by Dawnsun Electronic Technology Co., Ltd.
Zhongshan.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.