Item # 1001 xxx xxx Model # 51558 ETL Model # 56-BRM USE AND CARE GUIDE BREEZEMORE 56-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday. 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS THANK YOU We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this ceiling fan.
Table of Contents Table of Contents................................................................. 2 Assembly............................................................................... 7 Safety Information................................................................ 2 Operation............................................................................ 13 Warranty................................................................................ 3 Care and Cleaning................................
Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of two years after the date of purchase by the original purchaser.
Pre-Installation (continued) TOOLS REQUIRED Phillips screwdriver Flat blade screwdriver Adjustable wrench Electrical tape Wire cutter / Stripper Step ladder HARDWARE INCLUDED NOTE: Hardware should be packaged in a blister pack. NOTE: Hardware not shown to actual size.
Pre-Installation (continued) PACKAGE CONTENTS A F G B H C I D E Part Description Quantity A Slide-on mounting bracket (inside canopy) 1 B Ball/downrod assembly C D Part Description Quantity E Fan-motor assembly with light kit pan pre-attached 1 1 F Blade 5 Canopy 1 G Light kit fitter assembly 1 Decorative motor collar cover 1 H Glass bowl 1 I Light bulbs 2 IMPORTANT: This product and/or components are governed by one or more of the following U.S.
Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. (15.9 Kg) or less”, and use screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician.
Assembly - Standard Ceiling Mount 1 2 Preparing for mounting □□ Remove the canopy bottom cover (J) from the canopy (C) by □□ Routing the wires □□ Route the wires exiting the top of the fan-motor assembly (E) through the center of the canopy bottom cover (J). □□ Insert the ball/downrod (B) through the canopy (C) and slide the decorative motor collar cover (D) onto the end of the ball/downrod (B). Make sure the slots on the canopy (C) are on top.
Assembly - Hanging the Fan 1 2 Attaching the fan to the electrical box Hanging the fan □□ Carefully lift the fan-motor assembly (E) up to the slide-on WARNING: To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “Acceptable for fan support of 35 lbs. 15.9 kg) or less”, and use screws provided with the outlet box. □□ □□ NOTE: The mounting bracket (A) is designed to slide into place on an outlet box with the outlet box screws (GG) installed. mounting bracket (A).
Assembly - Hanging the Fan (continued) 3 Making the electrical connection WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. Outlet box in the ceiling II WARNING: Remove the rubber motor stops on the bottom of the fan before installing the blades or testing the motor.
Assembly - Hanging the Fan (continued) 4 5 Wrapping the extra wire Mounting the fan-motor assembly (standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. NOTE: Follow this step ONLY if you did not cut the extra length off from the wires coming from the ceiling fan.
Assembly - Hanging the Fan (continued) 6 7 Attaching the fan blades Attaching the light kit fitter assembly □□ Attach a blade (F) to blade bracket (L) using the decorative □□ □□ nuts (DD) and blade attachment screws (CC) provided. Insert a blade attachment screw (CC) through a hole in the blade (F) and the blade bracket (L) and into the decorative nut (DD). Repeat for the two remaining holes in the blade (F). Tighten each screw (CC) securely. Repeat these steps for the remaining blades.
Assembly - Attaching the Accessories 1 Installing the bulbs and glass bowl WARNING: Do not overtighten when installing the shade into the light kit. Allow the shade to cool completely before removing. CAUTION: Over lamping the fan will result in the fan lights shutting down until the proper wattage of bulbs are installed. Reset the lights by turning off the light and replacing the bulbs with the correct wattage bulbs. □□ With the power off, install the two fluoresecent bulbs (I) (Max.
Operating Your Fan and Remote Control Setting the code on the transmitter NOTE: The battery will weaken with age and should be replaced before leaking takes place as this will damage the remote control. Dispose of used battery properly and keep the battery out of the reach of children. NOTE: The switch marked ON/DIM controls the dimming function of the lights. If using non-dimmable bulbs, use a ballpoint pen or small screwdriver to set the switch to ON to disable the dimming function.
Operating Your Fan and Remote Control 1. Fan button. - Press and release the button to turn the fan on or off. □□ Press and hold the button for 5 seconds to enter the learning function. □□ Fan on. The fan memory function will resume the speed set on the fan prior to the power being turned off. The LED bar will display the current settings for 5 seconds after the button is released. Note: If you are currently using Comfort BreezeTM mode, pressing the normal fan operation.
Operating Your Fan and Remote Control 4. Timer □□ Pressing the timer button will automatically turn fan and light (if light is on) off after 2, 4, or 8 hours. When you activate the timer mode, the LED to the left of the time above the clock will illuminate. Off 2H 4H 8H Disables timer 5. Fan reverse button (Must be pushed when the fan is in operation) □□ Warm weather: LED bar will illuminate and the lights will flow from high to low.
Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. □□ Because of the fan’s natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. □□ Clean your fan periodically to help maintain its new appearance over the years.
Questions, problems, missing parts? Before returning to the store, call Home Depot Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
Artículo núm. 1001 xxx xxx Modelo núm. 51558 Modelo ETL núm. 56-BRM GUÍA DE USO Y MANTENIMIENTO VENTILADOR DE TECHO BREEZEMORE, DE 1.42 M ¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de Home Decorators Collection, de lunes a viernes entre 8 a.m. y 6 p.m. (hora estándar del Este). 1-800-986-3460 HOMEDEPOT.
Tabla de contenido Tabla de contenido............................................................... 2 Ensamblaje............................................................................ 7 Información de seguridad................................................... 2 Funcionamiento.................................................................. 13 Garantía................................................................................. 3 Mantenimiento y limpieza.....................................
Garantía El proveedor garantiza de por vida, a partir de la fecha en que el comprador original lo adquiere, que el motor del ventilador no presenta defectos de fabricación ni de materiales al momento en que es enviado desde la fábrica.
Preinstalación (continuación) HERRAMIENTAS NECESARIAS Destornillador Phillips Destornillador plano Llave ajustable Cinta de electricista Cortacables / Pelacables Escalera de tijera HERRAJES INCLUIDOS NOTA: Los herrajes deben estar empaquetados en un paquete de ampollas. NOTA: No se muestra el tamaño real de los herrajes.
Preinstalación (continuación) CONTENIDO DEL PAQUETE A F G B H C I D E Pieza Descripción Cantidad A Soporte de montaje deslizante (dentro de la cubierta) 1 B Ensamblaje de tubo bajante/bola C D Pieza Descripción Cantidad E Ensamblaje del motor del ventilador con carcasa del kit de luces preinstalada 1 1 F Aspa 5 Cubierta 1 G Ensamblaje del soporte del kit de luces 1 Cubierta decorativa del collarín del motor 1 H Pantalla de vidrio 1 I Bombillas 2 IMPORTANTE: Este produc
Instalación OPCIONES DE MONTAJE ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, instala solo en una caja eléctrica clasificada como “apropiada para sostener ventiladores de 15.9 kg o menos” y usa los tornillos que vienen con esta. Las cajas eléctricas utilizadas comúnmente para el soporte de lámparas pueden no servir como soporte de ventilador y tal vez deban reemplazarse. En caso de duda, consulta a un electricista calificado.
Ensamblaje - Montaje estándar en techo 1 2 Preparación para el montaje □□ Retira la tapa inferior (J) de la cubierta (C), girándola en □□ Disposición de los cables □□ Inserta los cables que salen por la parte superior del ensamblaje del motor del ventilador (E) a través del centro de la tapa de la cubierta (J). □□ Inserta el tubo bajante/bola (B) a través de la cubierta (C) y desliza la cubierta decorativa del collarín del motor (D) en el extremo del tubo bajante/bola (B).
Ensamblaje - Cómo colgar el ventilador 1 2 Cómo fijar el ventilador a la caja eléctrica Cómo colgar el ventilador □□ Con cuidado, levanta el ensamblaje del motor del ADVERTENCIA: Para reducir el riesgo de incendio, descarga eléctrica o lesiones personales, instala solo en una caja eléctrica clasificada como “apropiada para sostener ventiladores de 15.9 kg o menos” y usa los tornillos que vienen con esta.
Ensamblaje - Cómo colgar el ventilador (continuación) 3 Cómo realizar las conexiones eléctricas ADVERTENCIA: Cada cable no suministrado con este ventilador está diseñado para aceptar un máximo de un solo circuito eléctrico doméstico de calibre 12 y dos cables del ventilador. Si tienes un cableado doméstico superior a calibre 12 o más de un cable doméstico para conectar al cableado del ventilador, consulta a un electricista para conocer el tamaño adecuado de las tuercas para cables a usar.
Ensamblaje - Cómo colgar el ventilador (continuación) 4 5 Cómo enrollar el cable sobrante Cómo montar el ensamblaje del motor del ventilador (montaje estándar) ADVERTENCIA: Cuando uses el ensamblaje del tubo bajante/ bola estándar, la pestaña en el aro en la parte inferior del soporte de montaje debe encajar en la ranura de la bola de soporte. Si la pestaña no se asienta correctamente en la ranura, se puede dañar el cableado.
Ensamblaje - Cómo colgar el ventilador (continuación) 6 7 Cómo fijar las aspas del ventilador □□ Monta el aspa (F) en el soporte de esta (L) usando las □□ □□ tuercas decorativas (DD) y los tornillos para montar las aspas (CC) incluidos. Inserta un tornillo de montaje de aspas (CC) a través del orificio del aspa (F) y el soporte de esta (L) en una tuerca decorativa (DD). Repite para los otros dos orificios del aspa (F). Aprieta firmemente cada tornillo (CC).
Ensamblaje — Cómo instalar los accesorios 1 Cómo instalar las bombillas y la pantalla de vidrio ADVERTENCIA: No aprietes demasiado al instalar la pantalla en el ensamblaje del kit de luces. Espera que la pantalla se enfríe completamente antes de retirarla. PRECAUCIÓN: Colocar bombillas de vataje incorrecto hará que las luces del ventilador se apaguen hasta que se instalen las bombillas adecuadas. Apaga las luces y reemplaza las bombillas por otras del vataje correcto.
Cómo usar tu ventilador y el control remoto Cómo configurar el código del transmisor NOTA: La batería se debilitará con el tiempo y deberá ser reemplazada antes de que se produzca alguna fuga, ya que esto dañará el control remoto. Desecha la batería adecuadamente, y mantenla fuera del alcance de los niños.
Cómo usar tu ventilador y el control remoto 1. Botón del ventilador. Oprime y suelta el botón para encender o apagar el ventilador. □□ Mantén oprimido el botón durante 5 segundos para ingresar a la función de memorización. □□ Ventilador encendido. La función de memoria del ventilador reiniciará la velocidad configurada en el ventilador antes de haber cortado el suministro de electricidad. La barra de luz LED mostrará la configuración actual durante 5 segundos después de que sueltes el botón.
Cómo usar tu ventilador y el control remoto 4. Temporizador □□ Al presionar el botón Timer, el ventilador y la luz (si está encendida) se apagarán automáticamente después de 2, 4 u 8 horas. Cuando activas el modo Timer, la luz LED a la izquierda del tiempo sobre el reloj en la parte superior se iluminará. Apagado 2H 4H 8H Deshabilitar el temporizador 5.
Mantenimiento y limpieza ADVERTENCIA: Asegúrate de que la electricidad esté apagada antes de limpiar el ventilador. □□ Debido al movimiento natural del ventilador, algunas conexiones pueden aflojarse. Revisa las conexiones de soporte, los soportes y los accesorios de las aspas dos veces al año. Verifica que estén seguros. No es necesario desmontar el ventilador del techo. □□ Limpia el ventilador con frecuencia para que luzca como nuevo con el paso de los años. No uses agua al limpiar.
¿Preguntas, problemas o piezas faltantes? Antes de regresar a la tienda, llama al servicio al cliente de The Home Depot de lunes a viernes, de 8:00 a.m. a 6:00 p.m. (hora estándar del Este) 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Conserva este manual para uso en el futuro.