Installation Guide

12
Assembly - Attaching the Accessories
Installing the bulbs and glass bowl
1
□ With the power off, install the two uoresecent bulbs (I) (Max.
14W, included) by screwing into the light bulb sockets.
□ Place the glass bowl (H) into the light kit assembly, aligning
the three at areas on the top ange of the glass bowl (H) with
the three raised dimples in the light kit assembly. Turn the
glass bowl (H) clockwise until it stops.
I
H
G
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
CAUTION: Over lamping the fan will result in the fan lights
shutting down until the proper wattage of bulbs are installed.
Reset the lights by turning off the light and replacing the bulbs
with the correct wattage bulbs.