Instructions / Assembly
7
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the Light Kit Pan
Attaching the light kit pan
1
□ Remove one screw (EE) from the black bracket below fan
motor assembly (E), loosen but do not remove the other two
screws.
□ Push the light kit pan (F) up to the fan motor assembly (E)
so that the two loosened screw heads t into the keyhole
slots. Turn the light kit pan (F) clockwise.
□ Re-install the screw (EE) that was removed in step 1.
□ Make sure all the screws are rmly tightened.
E
F
EE
Attaching the blades to the blade
brackets
Fastening the blade assemblies to
the motor
1
2
□ Attach a blade (H) to blade bracket (G) using the decorative
nuts (DD) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(H) and blade bracket (G) and into the decorative nut (DD).
□ Tighten each screw securely.
□ Repeat these steps for each blade (H) and blade bracket (G).
□ Attaching the blade assemblies to the motor by aligning the
two screws holes in the blade bracket with the screw holes
in the center ywheel and secure with screws (CC).
□ Repeat this step for the remaining blade assemblies.
DD
AA
G
H
E
CC
Assembly - Attaching the Fan Blades