Use and Care Guide
13
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installing the inner glass
3
□ Remove the nial nut (QQ), hex nuts (RR), rubber washer (PP)
and the bottom cap (MM) from the threaded nipple of the light
kit tter assembly (H).
□ Position the inner glass bowl (I) over the threaded nipple.
□ Re-install the bottom cap (MM) to threaded nipple and secure
the glass bowl (I) properly with hex nut.
Assembly - Attaching the Accessories
Mounting the remote control holder
□ Slide the screw cover plate up to remove it from the wall
cradle.
□ Position the wall cradle in the desired position and attach it to
the wall using the included wall cradle screws.
□ Slide the screw cover plate back onto the wall cradle to
conceal the screws.
Screw cover
plate
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle to the wall.
Assembly - Attaching the Light Kit (continued)
Installing the outer glass
4
□ Position the outer glass bowl over the threaded nipple of the
light kit tter assembly (H).
□ Re-install the rubber washer(PP) to threaded nipple and
secure the glass bowl (J) properly with hex nut.
□ Re-install the nal nut and tighten it
E
J
RR
PP
QQ
E
I
NN
H
NN
PP
RR
QQ