Use and Care Guide

Operating Your Fan and Remote Control

POWER ON/OFF

Press and release the power button to turn the fan and light on or off.

LIGHT ON/OFF/DIMMING

Press and release the button to turn the light on or off.

Press and hold the button to activate the dimmer function.

CORRELATED COLOR TEMPERATURE (CCT) CHANGING

Push and release the button to cycle through the six color

temperature options.

Option 1: 2700K (Warm White).

Option 2: 3000K (Soft White).

Option 3: 3500K (Neutral White).

Option 4: 4000/4100K (Cool White).

Option 5: 5000K (Daylight).

Option 6: 6500K (Cool Daylight).

NOTE: The default temperature of the ceiling fan light is 3000k

(Soft White).

FAN SPEED

LEDs on the fan speed button will illuminate to the corresponding speed.

Press and release 1 time: turns the fan on high speed.

Press and release 2 times: turns the fan on medium speed.

Press and release 3 times: turns the fan to low speed.

Press and release 4 times: turns the fan off.

The fan is shipped from the factory with the reversing switch (YY)

positioned to circulate air downward. If airow is desired in the opposite

direction, turn your fan off and wait for the blades to stop turning, then

slide the reversing switch (located on the top of the motor housing) to the

opposite position, and turn the fan on again. The fan blades will turn in the

opposite direction and reverse airow.

A. Warm weather (Forward) - A downward airow creates a cooling

effect. This allows you to set your air conditioner on a higher setting

without affecting your comfort.

B. Cool weather (Reverse) - An upward airow moves warm air off of

the ceiling. This allows you to set your heating unit on a lower setting

without affecting your comfort.

A. Warm weather

B. Cool weather