Installation Guide
Table Of Contents
12
Attaching the switch cup
2
□ Remove three screws (UU) from the switch cup (E).
□ Connect the molded adaptor plug in the switch cup with the
molded adaptor plug of the fan motor assembly (D).
□ Align the holes on the switch cup (E) with the screws on the
switch cup adaptor (H).
□ Install the three screws (UU) that were removed in the rst
step.
□ Tighten all three screws (UU) securely.
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
switch cup.
IMPORTANT: It is critical to attach the switch cup using the
quick connector. The fan will not operate unless the switch
cup is connected to the fan.
Assembly - Attaching the accessories (continued)
E
UU
H
D