Instructions / Assembly
11
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Assembly - Attaching the accessories
Attaching the fan blades
Attaching the switch cup adaptor
6
1
□ Attach a blade (G) to a blade bracket (J) using the decorative
nuts (CC) and blade attachment screws (AA) provided. Insert
a blade attachment screw (AA) through a hole in the blade
(G) and the blade bracket (J) and into the decorative nut (CC).
Repeat for the two remaining holes in the blade (G).
□ Tighten each screw (AA) securely.
□ Repeat these steps for the remaining blades.
□ Remove one screw (QQ) from the black bracket below the
fan motor assembly (D). Loosen, but do not remove the
other two screws.
□ Align the key hole slots in the switch cup adaptor (H) with
the two screws in the black bracket.
□ Turn the switch cup adaptor (H) clockwise until the two
screws are situated in the narrow end of the keyholes.
□ Re-install the one screw (QQ) that was removed in the rst
step. Tighten all three screws rmly.
D
AA
G
CC
J
H
QQ
D
Assembly - Hanging the Fan (continued)
Attaching the switch cup
2
□ Remove one screw (UU) from the side ofthe switch cup
adaptor (H). Loosen but do not remove the other two screws
(UU).
□ Align the “L” shape holes on the switch cup (E) with the
screws on the switch cup adaptor (H). Turn the switch cup
(E) to hold it in position.
□ Install the other screw (UU) that was removed in the rst
step. Tighten all three screws (UU) securely.
E
UU
H
D