Instructions / Assembly

HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Use and Care Guide
More Club Chair
Assembly
1
PLANNING FOR ASSEMBLY
□ Read all instructions before
assembly.
□ To avoid damaging this product,
assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
□ Compare all parts with the Package
Contents list. If any parts are missing
or damaged, do not assemble the
chair. Contact Customer Service.
2
INSERTING THE LEGS
□ Carefully position the chair upside
down on a clean, padded surface.
Remove the black fabric bag
underneath the chair. This bag
contains the legs and necessary
hardware.
□ Place the two angled front legs (C)
into the front leg holes in the chair.
The front legs are interchangeable.
□ Place the two curved back legs (D)
into the back leg holes in the chair.
The ‘toe’ of the legs point outward,
away from the back of the chair. The
back legs are interchangeable.
C
D
3
SECURING THE LEGS
□ Insert bolts (A) with washers (B) into each leg and tighten
clockwise with the hex wrench (F).
B
A
F
4
ATTACHING THE DUST COVER
□ Remove the fabric protection strip from the Velcro strip along
the bottom edges of the chair and place the dust cover (E)
over the bottom of the chair.
□ Turn the chair right side up. The chair is now ready for use.
E
Care and Cleaning
□ For best results, clean with a soft, slightly damp cloth.
□ Do not clean with abrasive materials, bleach, or solvents.
PACKAGE CONTENTS
A – Bolt x 8
8mm*60mm
B – Washer x 8 C – Front leg x 2 D – Back leg x 2 E – Dust cover x 1 F - Hex Wrench x 1
Item #7159 400
Model #DH7111