Instructions / Assembly

CEILING INSTALLATION & FIXTURE ASSEMBLY
IMPORT ANT SAFETY INFORMATION
2
1.
2.
3.
4.
5.
6.
7.
Pull out all wires(White, Black, and Ground) out of junction box.
Unscrew
Compression Nut(F) from Canopy (E) and slide Canopy (E) down cord, Then
unscrew
Finial Nut(D) from the Crossbar(A). and slide the Crossbar(A) to suitable place to
ease
installation of Crossbar (A) to junction box.
Mount
the Crossbar (A) to the junction box by using provided Mounting Screws (B) as shown
in the picture.
Using
Wire Nuts (C) connect black wire from fixture to black wire from junction box. Connect
white
wire from fixture to white wire from junction box. Connect green wire of fixture to green
or
copper ground wire from the junction box. NOTE: Some junction boxes may not have a
ground
wire. In this case, attach green wire from the fixture to the ground screw located on
Crossbar
(A), as shown in the picture.
Tuck
wires back into junction box.
Screw
Finial Nut (D) onto Crossbar, Slide Canopy (E) back up cord and against the ceiling,
then us
e Compression Nut (F) to fix the Canopy (E), pls don't over tighten the Compression
Nut
(F).
Attach Wire Cage
(H) to Socket Cup
(G) and then screw on the socket ring(I) clockwise untile tight.
8. After installation, thread bulb into socket. Use suitable
w
attage as indicated on label.
,
As t
to