Instructions / Assembly

ON THE BOTTOM OF FURNITURE, ATTACH PART A OF THE
BRACKET BY SCREWING BOLT INTO THE CENTER HOLE OF THE
BLACK DISC/T-NUT ON THE BLACK DUST COVER. REPEAT WITH
PART B OF BRACKET TO THE ADJOINING PIECE OF FURNITURE
SNAP THE FURNITURE INTO PLACE FOLLOWING THE DIRECTION
OF `A' ARROW. TO DISENGAGE, LIFT APART FOLLOWING THE
DIRECTION OF `B' ARROW.
DO NOT PULL APART IN THE DIRECTION OF `A' ARROW
B (LIFT APART)
POINT
TOWARDS
EDGE OF
FURNITURE
BOLT SCREWS
INTO CENTER
OF BLACK
DISC/T-NUT
BOLT SCREWS INTO
CENTER OF BLACK
DISC/T-NUT
BLACK DISC
ON BOTTOM
BLACK DISC
ON BOTTOM
HAND TIGHTEN MALE CONNECTOR (PART B)
THEN TURN AN ADDITIONAL 1/4 TURN TO
ALIGN POINT TO EDGE OF FRAME AND TO
INSERT INTO (PART A) ON ADJOINING FRAME
PART A (FEMALE)
PART B (MALE)
ON THE BOTTOM OF FURNITURE, ATTACH PART A OF THE
BRACKET BY SCREWING BOLT INTO THE CENTER HOLE OF THE
BLACK DISC/T-NUT ON THE BLACK DUST COVER. REPEAT WITH
PART B OF BRACKET TO THE ADJOINING PIECE OF FURNITURE
SNAP THE FURNITURE INTO PLACE FOLLOWING THE DIRECTION
OF `A' ARROW. TO DISENGAGE, LIFT APART FOLLOWING THE
DIRECTION OF `B' ARROW.
DO NOT PULL APART IN THE DIRECTION OF `A' ARROW
B (LIFT APART)
POINT
TOWARDS
EDGE OF
FURNITURE
BOLT SCREWS
INTO CENTER
OF BLACK
DISC/T-NUT
BOLT SCREWS INTO
CENTER OF BLACK
DISC/T-NUT
BLACK DISC
ON BOTTOM
BLACK DISC
ON BOTTOM
HAND TIGHTEN MALE CONNECTOR (PART B)
THEN TURN AN ADDITIONAL 1/4 TURN TO
ALIGN POINT TO EDGE OF FRAME AND TO
INSERT INTO (PART A) ON ADJOINING FRAME
PART A (FEMALE)
PART B (MALE)